WARNING: REPEAT DRIVE ESCS ONLY WORK WITH BRUSHLESS MOTORS.
Whether Repeat drive mini, repeat drive max, or another brushless option, these ESCs are designed for smooth bidirectional movement and great low rpm high torque control in a VERY SMALL PACKAGE.
The Micro AM32 esc is the smallest on the market at 12mm x 18mm!
Take the size savings without sacrificing drive performance! Running AM32 firmware tuned for robot drivetrains these are great for 1lb or 3lb drive!
Repeat Micro AM32 ESC is a custom AM32 firmware ESC that is pre-programmed for smooth bi-directional movement. We take all the guessing out of brushless drive, simply solder the three wires from your brushless motor onto the pads, plug into your receiver, and drive away!
Specifications:
- 25A continuous current rated
- ~5g weight (with 10cm wires shortening)
- 18mm x 12mm x 4mm size
- AM32 firmware
- Comes pre-flashed with Repeat Drive Bi-directional settings, tailored for repeat drive solutions
- 3-4S capable
- Programmable through the AM32 esc config tool available HERE
- Notes:
- This is a brushless ESC for converting to brushless drive. If your receiver was being powered from a BEC in your brushed drive you'll need to add a BEC.
- These ESCs do not ship with connectors, you need to solder the motor leads to the ESC or add your own connectors.
