Specifications:
- High strength 7075 Aluminum material
- Slightly undersized 1/4 inch shaft to fit bushings and bearings
- Undersized 17.8mm flange to fit into 18mm pockets for extra strength
- Tapped for 6-32 screws
- Generous chamfer at the base of the standoff increases strength
- 7.5g for a set of 2 long axles (~4 g each)
- 6.2g for a set of 2 short axles (~3g each)
- 9.8g for a set of 2 high load axles (~5g each)
- Now 2 length options for shorter wheels or bots who run cleats!
High Load Version
- Slightly undersized 3/8 inch shaft to fit bushings and bearings
- Undersized 17.8mm flange to fit into 18mm pockets for extra strength
- Tapped for 10-32 screws
- 5/8" flats on the base
Cad Link:
https://grabcad.com/library/repeat-drive-axle-mk2-1
